Faculty Achivements

STTP’s Attended

 

Sr. No.

Name of Course

Place

Period

Dates

1

Renewable Energy Source for Sustainable Development: Need, Technologies and Policies

QIP sponsored and held at VJTI, Mumbai.

1 week

04-09/03/2017

2

Advances in manufacturing technology and management

QIP sponsored and held at VJTI, Mumbai.

1 week

22-27th Feb 2016

3

Workshop on Padagogy for Effective use of ICT in Engg. Education

IIT Bombay held at JJMCOE

2 weeks

05th -31st Jan 2015

4

Workshop on Engineering Mechanics

IIT Bombay held at JJMCOE

2 weeks

26th – 06th Dec 2013

5

FEM- Tool for non-linear analysis

Dr. J. J. Magdum college of Engg., Jaysingpur

1 week

21st- 26th Dec. 2009

6

Introduction to FFT Analyzer and its Application for Industrial Consultancy

SVERI College of Engineering, Pandharpur

One Week

11th Dec. to 16th Dec. 2017

7

Vibro-acoustics

IIT, Mumbai

1 week

4.12.2017 to 8.12.2017

8

Industrial Tribology

VJTI, Mumbai

01 week

7.12.2015 to 10.12.2015

9

Faculty induction Programme

Dr. JJMCOE,

Jaysingpur

01 week

15.7.2015 to 22.7.2015

10

Recent Trends in Design, Failure Analysis and Maintenance of Bearing

Dr. JJMCOE,

Jaysingpur.

01 week

22.6.2015 to 26.6.2015

11

Research Methodology: Tools and Techniques

Dr. JJMCOE,

Jaysingpur.

01 week

7.1.2014 to 11.1.2014

12

Engineering Mechanics

IIT,Mumbai

02 week

26.11.2013 to 6.12.2013

13

Introduction to Research Methodology

IIT,Mumbai

02 week

25.12.2011 to 4.1.2012

14

FEM- Tool for Nonlinear Analysis

Dr. JJMCOE,

Jaysingpur.

01 week

21.12.2009 to 26.12.2009

15

Teaching Pedagogies and Modern Trends in teaching

Dr. JJMCOE,

Jaysingpur.

02 week

26.12.2006 to 6.1.2007

16

Finite Element analysis and signal processing in rotating Machineries

IIT, Guwhati

01 week

19.12.2005 to 23.12.2005

17

Present Trends and Future Prospects in Mechatronics

Dr. JJMCOE,

Jaysingpur

01 week

31.5.2004 to 5.6.2004

18

Engineering Mechanics

by IIT Bombay at Dr. JJMCOE, Jaysingpur

2 Week

Dec.,2013

19

Renewable Energy Sources for Sustainable Development: Need, Technology, and Policies

VJTI, Mumbai

One week

4th March to 9th March 2017

20

Advances in Manufacturing Engineering

Doulatrao Aher College of Engineering, Karad

One week

5th to 9th December 2016

21

Pedagogy for Effective use of ICT in Engineering Education  under National Mission on Education through ICT (MHRD)

IIT Bombay at RC-JJM

Two week

5th Jan – 31st Jan 2015

22

Engineering Mechanics  under National Mission on Education through ICT (MHRD)

IIT Bombay at RC-JJM

One week

26th Nov. – 6th Dec. 2013

23

Advanced Manufacturing Techniques

DKTE Ichalkaranji

1 week

12-01-2015 to 16-01-2015

24

Recent Trends in Design, Failure Analysis and Maintenance of Bearings.

Dr. JJMCOE

1 week

22-06-2015 To 26-06-2015

25

Computational Fluid Dynamics”

COE, Karad

1 week

28th March to 1st April 2013

26

Advances in Refrigeration and Air Conditioning

S.E.A. T.I. Panhala

1 week

2nd to 6th Fabruary 2016

27

Automobile Engineering: Advances and Research Opportunities

RIT, Sakharale

1 week

18th to 22nd June 2012

28

Present Trends and Future   Prospects in Mechatronics

Dr. JJMCOE, Jaysingpur

1 week

31st May to 5th January 2004

29

Air Conditioning System Design

IIT Bombay

1 week

2nd to 06th February 2004

30

Heat Transfer

IIT Bombay at KIT, Kolhapur remote Centre

2 week

29th November to 10th December 2011.

31

Teaching Pedagogies and modern trends in Teaching

JJMCOE, Jaysingpur

2 week

JJMCOE, Jaysingpur from 26th December to 06th January 2007

32

Development in Modern Automobiles

WCE, Sangli

2 week

12th to 24th December 2005.

33

Mechatronics

KIT, Kolhapur

2 week

6th to 17th June 2005

34

Present trends and future prospects in Mechatronics

Dr. J.J. Magdum college of Engineering,

Jaysingpur

1 week

31.05.2004 to 05.06.2004

35

Computer vision and its applications

P E S College of Engineering Mandya

2 week

12.07.2004 to 24.07.2004

36

Fuels and combustion technology

I.I.T. Guwahati

1 week

05.12.2005 to 09.12.2005

37

Finite element analysis and design optimization

K.I.T. College of Engineering Kolhapur

1 week

24.06.2006 to 29.06.2006

38

Product design and optimization

I.I.T. Madras

1 week

21.12.2013 to 25.12.2013

39

Research methodology: tools & techniques

Dr. J.J. Magdum college of Engineering,

Jaysingpur

1 week

07.01.2014 to 11.01.2014

40

Recent trends in Design, Failure analysis and Maintenance of Bearing

Dr. J.J. Magdum college of Engineering,

Jaysingpur

1 week

22.06.2015 to 26.06.2015

41

Developing competency for technical pedagogy

A.T.S. SBGI Miraj

1 week

28.12.2016 to 01.12.2016

42

Emerging trends and approaches in product design and development

P.V.P.I.T. Bughgaon

1 week

27.11.2017 to 09.12.2017

43

Recent trends in Non –Conventional Energy with the focus on Solar and Wind Energy

G. C.O.E.Karad

1 week

25th  -29th May 2015

44

Fluid Mechanics

W.C.E.Sangli

1 week

20th – 30th May 2014

45

Research Methodology : Tools and Techniques

Dr JJMCOE

1 week

7TH – 11TH Jan 2014

46

C. F.D.

G C.O.E.Karad

1 week

28th Mar. - 1st Apr.2013

47

Advances in HVAC

BATU LONERE

1 week

8TH - 12TH JAN 2013

48

Thermodynamics in Mech. Engg

W.C.E.Sangli

1 week

14th -24th June 2011

49

One Week STTP on Renewable Energy Source for Sustainable development Need,Technologies and Policies

           VJTI,Mumbai

One Week

04-03-2017

To

09-03-2017

 

50

One Week STTP on Advances in Manufacturing and Management

VJTI,Mumbai

One Week

22-02-2016

to

27-02-2016

51

Two Week ISTE workshop on Engineering Mechanics

 Dr. J. J. M. COE, Jaysingpur.

Two Week

26-11-2013

to

06-12-2013

52

Two Week ISTE workshop on Pedagogy for effective use of ICT in Engineering

 Dr. J. J. M. COE, Jaysingpur.

Two Week

05-01-2015

to

31-01-2015

53

Software training in CATIA

Dr. J. J. M. COE, Jaysingpur.

Six Weeks

31st July to

3rd April 2010.

54

Renewable Energy Source for Sustainable Development: Need, Technologies and Policies

AICTE- QIP sponsored and held at VJTI, Matunga , Mumbai

1 week

04-09/03/2017

55

Advances in manufacturing technology and management

QIP sponsored and held at VJTI, Mumbai.

1 week

22-27th Feb 2016

56

Environmental studies

IIT Bombay held at JJMCOE

2 weeks

02-12th June 2015

57

FEM- Tool for non-linear analysis

Dr. J. J. Magdum college of Engg., Jaysingpur

1 week

21st- 26th Dec. 2009

58

Research methodology: Tools and Techniques

Dr. J. J. Magdum college of Engg., Jaysingpur

1 week

7th to 11th January

59

Advances in Fluid Mechanics and CFD

Government College of Engineering, Karad, Under TEQIP-II,

1 week

April 2016

60

Recent Trends in Non-Conventional Energy with the Focus on Solar and Wind Energy

Government College of Engineering, Karad, Under TEQIP-II,

1 week

May 2015

61

Development skills for Technical Pedagogy

SBGI, Miraj, Organized by Department of Mechanical Engg ,

 1 Week     

Jan.2015

62

Fluid Mechanics

by IIT Kharagpur at WCE, Sangli,

2 Week

May,2014

63

Engineering Mechanics

by IIT Bombay at Dr. JJMCOE, Jaysingpur

2 Week

Dec.,2013

64

Computational Fluid Dynamics

Government College of Engineering, Karad, Under TEQIP-I,

1 week

March 2013

65

Introduction to Research Methodology

by IIT Bombay at NITK, Suratkal, Under Eklavya distance learn

2 Week

July,2012

66

Computational Fluid Dynamics”

by IIT Bombay at SGIT, Atigare, Under Eklavya distance learn

2 Week

June,2012

67

Basics in Thermodynamics

by IIT Bombay at WCE, Sangli, Under Eklavya distance learn

2 Week

June 2011

68

MODULAR TRAINING IN CATIA V5R17

Advanced Cad Technologies.’ Pune

1 Month

Sept.2008

69

Mastering the techniques of teaching

RIT, Sakharle.

02 week

05-05-2003 to 17-05-2003

70

FEM and its application

PES, Mandya.

02 week

11-07-2005 to 22-07-2005

71

Teaching Pedagogies

Dr. JJM, Jaysingpur.

02 week

26-12-2006 to 06-01-2007

72

Introduction to research Methodology

WCE, sangli.

02 week

25-06-2012 to 04-07-2012

73

Engineering Mechanics

Dr. JJM, Jaysingpur.

02 week

26-11-2013 to 06-12-2013

74

FEM tool for nonlinear analysis

Dr. JJM, Jaysingpur.

01 week

21-12-2009 to 26-12-2009

75

Present trends and future prospectus in Mechatronics

Dr. JJM, Jaysingpur.

01 week

31-05-2004 to 05-06-2004

76

Research Methodology

Sinhagad Academy Pune

01 week

16-04-2012 to 21 -04-2012

77

Industrial Tribology

VJTI,Mumbai.

01 week

07-12-2015 to 11-12-2015

78

Recent trends n failure analysis

Dr. JJM, Jaysingpur.

01 week

22-06-2015 to 26-06-2015

79

One week STTP on “ Performance Appraisal and Development System

WCE Sangli

One week

17th to 22nd March 1997

80

One week STTP on “present trends and future prospectus in Mechatronics

Dr. J. J. Magdum College of Engg. Jaysingpur

One week

31st May to 5th June 2004

81

Two weeks summer school on “Mechatronics”

KIT’s college of Engg. Kolhapur

Two weeks

6th to 17th June 2005

82

QIP Short Term Course on “ Analysis of Modern Manufacturing Processes”

Indian Institute of Technology Bombay

Two weeks

29th November to 12th December 2006

83

Two weeks STTP on “Teaching Pedagogies and Modern Trends in Teaching”

Dr. J. J. Magdum College of Engg. Jaysingpur

Two weeks

26th December 2006 to 6th January 2007

84

One week QIP short term course on “Gear Tribology”

I. I. T.

Bombay

One week

1st April to 5th April 2008

85

Two week ISTE workshop on Engineering Mechanics

I. I. T. Bombay

Two week

26 Nov to 6th December 2013

86

ISTE-PTU FDP on Outcome Based education

Rajarambapu Institute of Technology

One week

23-27 June 2014

59

STTP on “ Recent Trends in Quality Management

Vasantdada Patil Institute of Technology

One week

29 Dec 2014 to 2nd January 2015

60

One Week STTP on “Recent Trends in Design, Failure Analysis and Maintenance of bearings

Dr. J. J. Magdum College of Engineering

Jaysingpur

One week

22-26 June 2015

61

One week STTP on “ Application of MATLAB in Engineering and Science”

College of Engineering, Karad

One week

23-27 Dec 2015

62

One week STTP on” Developing Competency for Technical Pedagogy”

Sanjay Bhokare Group of Institutions

One week

28 Dec 15 to 1 Jan 16

63

One week STTP on

“Training the Trainer program on Qualification pack” )product Design Engineering)

NASSCOM in collaboration with department of Technology

Shivaji University

One week

26 September 2016 to 1 October 2016

64

One week STTP on

“Outcome Based Education for Engineering”

P. V. P. Institute of Technology

Budhgaon

One week

26 December 2016 to 30 December 2016

Paper Published / Presented (National/ International Conference)

 

Sr. No.

Title of Paper

Publication details

1

An overview of Friction stir welded alloys: Microstructure and Properties.

Emerging Trends in Engg.-ICETE 2013 ” held during Feb-22nd  -23rd February at JJMCOE

2

An overview of Radiator Performance Evaluation and Testing.

Emerging Trends in Engg.-ICETE 2013” held during Feb-22nd  -23rd February at JJMCOE

3

Analysis of Anti-Roll Bar of

Passenger Car Using Alternative Material.

International Conference on Science,

Technology And Management (ICSTM-2015). Delhi

4

“A Review Experimental Investigation of Heat transfer by Natural convection with horizontal rectangular staggered fins”

Ijsrd ISSN(online)-2321-0613, volume-2 january 2015

5

Heat Transfer Enhancement Using Electrohydrodynamic and Magnetohydrodynamic Techniques: A Review

Asian Review of Mechanical Engineering

ISSN: 2249 - 6289 Vol. 6 No. 1, 2017, pp.1-2

6

Condition Monitoring & Vibration Analysis and acoustics signals

National conference on Emerging Trends in Mechanical Engineering ETME-2009, MIT, Aurangabad

7

Controlling the gear box resonance by changing effective mass

International Conference on Emerging Trends in Engineering ICETE 2010,JJMCOE Jaysingpur

8

Solar Water Bypass Heating system

National conference on Recent Trends in Engineering April 2009, PVPIT,Budhgaon

9

Smart material Magneto rheological fluid

International Conference on Emerging Trends in Engineering ICETE 2013,JJMCOE Jaysingpur

10

Through put line reduction by lean manufacturing

International Conference Emerging Trends in Engineering ICETE 2013,JJMCOE Jaysingpur

11

“Energy audit of an industry”, National Conference on Recent Trends in Instrumentation (NCRTI-12)

PVPIT, Budhgaon, 2012

12

Energy Conservation : Save Today Survive Tomorrow 

NCSDE 2012, COEP, Pune

13

Stress Distribution at the Cu-SiCDispersoid Interface.

Mettle 2004, a national level technical symposium, NIT, Tiruchirappalli

14

Stress distribution at Cu-SiC dispersoid plane strain FEA.

Meta Vista- 2004, a national level technical paper presentation competition, COEP Pune

15

Design of Development of waste Heat Recovery Systems for Domestic Refrigerator

,Second International Conference on Emerging Trends in Engineering, 2012,

16

Safety aspects of CO2 as Refrigerant

Second International Conference on Emerging Trends in Engineering,2012, 35-39

17

Comparative Performa Analysis of 165L Refrigerator for R12, R134a and Blend 290-600a (50%-50% by mass) by using Refrigerator test rig

Presented in International Conference on sunrise Technologies iCOST2011),ISSN-2229-2011,J135PP ME276-281

18

Natural Convection Heat Transfer From Horizontal Rectangular Fin Arroyo with a Triangular Notch at the center

Presented in ICETE 2010, JJMCOE, Jaysingpur,2010,Pp 152-157

19

Magneto rheological fluids and their applications

Presented in NCSP-2009, MIT Aurangabad,2009

20

Significance of use of Ammonia as modern Refrigerant

Presented in NCSP-2009, MIT Aurangabad,2009

21

Pulse Tube Refrigeration

Presented in YANTRA 2005, College of Engineering, Pandharpur,2005,PP 265-269

22

Effect of Methyl – Ester blends on performance of single cylinder diesel engine

1st National Conference on ‘Recent Development in Mechanical Engineering ’2005,Pandharpur

23

Performance  testing of C.I.Engine Using Castor Biodiesel

NCDCAI 2013SBGI,Miraj

24

Smart Material: Magneto Rheological Fluid

2nd International Conference Emerging trends in Engg. 2013, Jaysingpur

25

Reduction In Setup Time By SMED a Literature Review

International Journal of Modern Engineering Research

ISSN:- 2249-6645

26

An Overview of SMED to Reduce Setup time

National Conference  on “Recent Advancements in Engineering,2012”

at Sanjeevan College of Instittue and Technology,Panhala

27

Process Improvement by using Value Stream Mapping:-A Case Study in Small Scale Industry

International Journal of Engineering Research  and Technology ISSN:-  2278-0181

 

28

Application of SMED Methodology-A Case Study in Small Industry

International Journal of Scientific and Research Publications

ISSN :- 2250-3153

 

29

Energy Auditing and Management of an Industry

National Conference on “Recent Trends in Instrumentation Engineering”

(NCRTI-12)

30

An industrial energy auditing: basic approach.

International Journal of Modern Engineering Research

ISSN:- 2249-6645

31

Application of Lean Manufacturing Techniques for  Process Improvement A Case Study in Small Industry

International Symposium at Kolhapur.

32

Through Time reduction by  Lean Manufacturing Techniques

International Conference on “Emering Trends in Engineering at Dr.JJMCOE,

Jaysingpur.

33

Design of Storage and Material Handling system for pipe Industry-A Case Study

ICRTESM-15 (JNU New Delhi)

34

Design of Storage and Material Handling system for pipe Industry-A Case Study

International Journal of Advance Research in Science and Engineering (IJARSE)

35

Material Handling System

–A Case Study For Small Scale

Industry

International Journal of Advanced Technology in Engineering and Science (IJATES)

36

The Development of a Material Handling System Using a Wire Rope-–A Case Study

International Journal of Advanced Information Science and Technology(IJAIST)

37

 Design and Development of Automatic Wire Cutting Machine: A case Study in Small Scale Industry

International Journal for Research in Applied Science and Engineering Technology(IJRASET)

38

An overview of Friction stir welded alloys: Microstructure and Properties.

Emerging Trends in Engg.-ICETE 2013 ” held during Feb-22nd  -23rd February at JJMCOE

39

An overview of Radiator Performance Evaluation and Testing.

Emerging Trends in Engg.-ICETE 2013” held during Feb-22nd  -23rd February at JJMCOE

40

Preparation of SAP/Routing through process study and process improvement”

Emerging Trends in Engg.-ICETE 2010 ” held during Feb-20th -21st at JJMCOE

41

“Thermodynamic simulation and exergy analysis of R404A-R23 cascade refrigeration system”

 

Presented atICRTET’14, SNJB’s College  of engg. , Nashik.

42

Experimental investigation of performance and waste heat recovery from condensing section of domestic refrigerator under varying evaporator load”

 

Published at ICEE’14, JNTU Hyderabad.

43

Heat Transfer Enhancement by using Nanomaterial in Phase Change Material for Latent Heat Thermal Energy Storage System”

1.       IVth International Conference on Advances in Energy Research, December 10-12, 2013 IIT Bombay, Mumbai

 

44

Stability of Al2O3 Nano-Suspension in Phase Change Materials

International Conference on Advances in Mechanical Engineering, May 29-31, 2013, COEP, Pune, Maharashtra

45

Heat Transfer Enhancement in a Latent Heat Storage System: Review

Proceeding of National Conference in Recent Advances in Mechanical Engineering (NCRAME), June 28-29, 2013, Govind Ballabh Pant Engineering College Ghurdauri, Pauri-Garhwal, Uttarakhand (INDIA).

 

46

Experimental Investigation of Heat Transfer Enhancement in Al2O3/ Paraffin Wax Nanofluid in Thermal Energy Storage System

Proceedings of National Conference on Frontiers in Mechanical Engineering (FIME-2013), ISBN: 978-93-83083-27-5, August 29-31, 2013, MANIT, Bhopal, India.

47

Augmentation of Forced Convection Heat Transfer from Discrete Fins

Proceedings of National Conference on Frontiers in Mechanical Engineering (FIME-2013), ISBN: 978-93-83083-27-5, August 29-31, 2013, MANIT, Bhopal, India.

48

Rapid Prototyping

National Conference on ‘Emerging Trends in Engg. ‘2006,Bangalore.

49

Condition Monitoring & Vibration Analysis

National Conference on ‘Emerging Trends in Mechanical  Engg. ‘2009,Arungabad.

50

Controlling gear box resonance

ICETE , Dr. JJM , Jaysingpur ,2010.

51

Shear strength Analysis of brake

IJSRD, 2014.

52

Reliability analysis

IJSRD 2015.

53

FE Analysis of Adhesive joint

IJAER &S, 2014.

54

MR Fluid

ICETE , Dr. JJM , Jaysingpur ,2010.

55

“Breakdown Reduction in Automobile Industry by Using Root Cause Analysis Tool”,

3rd RIT Post Graduates Conference organized by Rajarambapu Institute of Technology Islampur, on 25th March, 2017

 

56

 “Breakdown Analysis and Improvement in Preventive Maintenance on FMS Cell”,

NCRTME-17 Conference organized by department of mechanical engineering, Walchand College of Engineering sangli, during 29-30th June 2017

 

57

"Design and Development of Automobile Clutch Bearing Test Rig  - A case study"

NCRTM 2006 at KIT college of Engineering Kolhapur

58

"Design for Assembly"

ETIME 2006 BMS College of Engineering Bangalore

59

“ TRIZ -  Theory of inventive problem solving ” 

RTPD 2006 Textile and Engineering Institute Ichalkaranji Kolhapur

60

“Magnetorheological fluids and their applications”

National Conference on Emerging  Trends in Mechanical Engineering, MIT Aurangabad.

61

“Alternative Fuels for I.C. Engines – A Review”

National Conference on Emerging  Trends in Mechanical Engineering, MIT Aurangabad.

62

Design and Development of Automobile Clutch Bearing Test Rig  - A case study

"International conference on Emerging Trends in Engineering- ICETE 2010” at Dr. J. J. Magdum College of Engineering Jaysingpur

63

Some studies on stress analysis of machine components using Finite Element Method and Photoelasticity

International Conference on Sunrise Technologies iCOST 2011 at BSD College of Engineering Dhule

64

Transmission Techniques for measurement of elastic properties of materials

Journal in advances in science and technology

65

Porous Silicon Nitride Materials Produced with Starch

Journal in advances in science and technology

66

Production of Sintered Silicon Nitride Cutting tool Material

Journal in advances in science and technology

67

Mechanical Behavior of  multilayered thin films and their measurements

Journal in advances in science and technology

68

Analysis of semi Active suspension System with Bingham Model Subjected to Random Road excitation using MATLAB/Simulink

IOSR Journal of Mechanical and Civil Engineering

69

A Comparative Analysis About Sliding Applications And Concepts of Sintered High Speed Steel

Journal in advances in science and technology

70

A Research upon Advancement and Application of New Cutting Tool Materials

Journal in advances in science and technology

71

Application of 8D methodology for minimizing the defects in Manufacturing Process: A Case Study

International Journal of Engineering Research & Technology (IJERT)

Vol. 6 Issue 09,

 

Workshops attended

 

Sr. No.

Name of Course

Duration

Dates

Place

1

Faculty induction program

1 week

15-22th July 2015

JJMCOE, Jaysingpur

2

Industrial automation

3 days

03-05 March 2015

JJMCOE, Jaysingpur

3

Workshop on Empowering Technical Education to Address Sustainability and Global Competitiveness

3 days

19th -21st Dec 2013

TKIET, WarnaNagar

4

Introduction to Latex

1day

10/09/2014

Dept. of ETRX JJMCOE

5

Workshop on  “ Improving Teaching Pedagogy”

3 days

16th – 18th Sept. 2010

JJMCOE, Jaysingpur

6

Workshop on “ Software Training in CATIA”

4 days

31st – 3rd April 2010

JJMCOE, Jaysingpur

7

Intellectual Property Rights

Two Days

24th -25th Nov. 2017

JJMCOE Jaysingpur

8

Computer Aided Machining using Edgecam Softaware

One Day

1st Sep. 2017

ADCET Ashta

9

Attended workshop on LATEX

1 day

2015

JJMCOE,JAYSINGPUR

10

Attended workshop on CFD in 2

 

1 day

2014

PVPIT, BUDHGAON

11

Teaching Methodology in subject Noise and Vibration

1 Day

22.12.2017

NMC,Peth

12

Intellectual Property Rights

2 Day

24.11.2017 to 25.11.2017

Dr.JJMCOE, Jaysingpur

13

National Seminar on Vibration and noise Measurement and Control

3 Day

21.3.2016 to 23.3.2016

Dr.JJMCOE, Jaysingpur

14

Faculty Development Programme on Vibration Measurement and analysis

2 Day

31.10.2015to 1.11.2015

PVPIT, Budhgaon

15

Epicyclic Gear Train and Holding Apparatus

1 Day

17.10.2015

Polylab Engineering Equipment, Miraj

16

Application and Hardware Interface using MATLAB

1 Day

29.8.2015

Dr.JJMCOE, Jaysingpur

17

Teaching Methodology in design related and interdisciplinary subjects of T.E.(Mechanical) Part I and II revised Syllabus of  Shivaji University,Kolhapur

1 Day

14.8.2015

PVPIT,Budhgaon

18

Teaching Methodology in design related and interdisciplinary subjects of T.E.(Mechanical) Part I and II revised Syllabus of  Shivaji University,Kolhapur

1 Day

1.8.2015

Dr.JJMCOE, Jaysingpur

19

Curriculum development of T.E./B.E Mechanical(Heat Power)Engineerig subjects of Shivaji University

1 Day

31.1.2015

PVPIT,Budhgaon

20

Teaching Methodology of S.E.(Mechanical),Curriculum development of T.E./B.E Mechanical design releted subjects of Shivaji University

1 Day

12.22015

Dr.JJMCOE, Jaysingpur

21

Industrial Automation

3 Day

3.3.2015 to 5.3.2015

Dr.JJMCOE, Jaysingpur

22

Introduction to Latex

1 Day

10.9.2015

Dr.JJMCOE, Jaysingpur

23

Product Design and Creativity

2 Day

16.8.2013to 17.8.2013

Dr.JJMCOE, Jaysingpur

24

Application of Finite Element analysis Using ANSYS-13

2 Day

03.8.2013 to 4.8.2013

Dr.JJMCOE, Jaysingpur

25

Recent advances in Design

2 Day

10.3.2011to 11.3.2011

Dr.JJMCOE, Jaysingpur

26

Teaching Methodology for M.E.-Mechanical (Machine Design) Revised Syllabus

1 Day

28.9.2012

Dr.JJMCOE, Jaysingpur

27

Vibration Design Methodology and Analysis

2 Day

30.7.2010 to 31.7.2010

DKTE,Ichalkaranji

28

Curriculum Development of B.E(Mechanical) Part I & II revised structure

1 Day

08.1.2010

Dr.JJMCOE, Jaysingpur

29

Teaching Methodology For T E-Mechanical(Revised)

1 Day

1.8.2009

PVPIT Budhgaon

30

Teaching Methodology in Basic Mechanical Engineering For F E Part II

2 Day

10.1.2008 to 11.1.2008

DKTE,Ichalkaranji

31

Digester Risk Management

2 Day

28.3.2007 to 29.3.2007

Dr.JJMCOE, Jaysingpur

32

Control Techniques for Mechanical & Electronics systems

2 Day

19.1.2007 to 20.1.2007

Dr.JJMCOE, Jaysingpur

33

Teaching methodology in subjects of B.E Part I &II new syllabus

1 day

19.08.2016

JJMCOE

34

Applications and Hardware interface using MATLAB

1 day

29.09.2015

JJMCOE

35

'Computer Aided Machining using Edgecam Software

 

1 day

01.09.2017

ADCET Astha

36

Product Design and Creativity

2 day

16.08.2013-17.08.2013

JJMCOE, Jaysingpur

37

“IC engines Assembly Hands on Practice”

One day

23rd Dec 2016

Dr. JJMCOE

38

“Research Methodology under LEAD College”

One day

20th Oct. 2016

Dr. JJMCOE on

39

Cold Room Technology,

One day

29th Nov. 2014

ISHRAE Kolhapur Sangli Sub Chapter

40

“Empowering Technical Education to Address Sustainability & Global Competitiveness”

Three days

19th – 21st Dec. 2013

TKIET, Warnanagar.

41

“Computational Fluid Dynamics” organized by

Two days

28th -30th Jan 2011

RIT, Sakharale

42

“Engineering Education Towards Global Repute”

One day

on 7th Oct. 2011

Dr. J. J. JMCOE

43

Improving Teaching Pedagogy”

Two days

16th - 18th, Sept. 2010

Dr. J. J. JMCOE

44

Software training in CATIA

Three day

31st July to 3rd April 2010.

Dr. J. J. JMCOE

45

Recent Advances in Design

2 day

10th& 11th March 2011

Dr. J. J Magdum College of Engineering, Jaysingpur

46

Application of Finite Element Analysis using ANSYS- 13

2 day

3rd& 4th August 2013

Dr. J. J Magdum College of Engineering, Jaysingpur

47

Teaching Methodology in Design related and interdisciplinary subjects of T.E. Mechanical Part I m& II revised syllabus of Shivaji University, Kolhapur

One Day

14th August 2015

Dr. J.J. Magdum College of Engineering, Jaysingpur,

48

Teaching methodology for TE/BE Mechanical Heat Power Engineering subjects

One Day

1st August 2015

PVPIT Budhagaon

49

PVPIT Budhagaon

One Day

9th December 2015

Eloit Innovations

50

Syllabus formation for S.E. Mech. Sem III and IV revised syllabus

One Day

2014

SIT, Yadrav

51

Teaching Methodology in P.G. M.E. Revised Course:

One Day

12th October 2012

PVPIT, Budhgaon

52

Teaching Methodology for B.E. (Mech) Part I and II

One Day

02nd April 2011.

ADCET Ashta

53

Best Practices for strategic growth of engineering Institutions

One Day

29th January 2011.

Pune

54

Best Practices in operation of Refrigeration Systems for cold storages and dairy plants

One Day

26th November, 2011

ASHRAE chapter, Pune

55

Curriculum development of B.E. Mechanical part I & II revised structure

One Day

8th January 2010.

Dr. J.J. Magdum College of Engineering, Jaysingpur

56

Syllabus Revision for T.E. (Mech) Part I and II

One Day

09th January 2009.

DKTE Ichalkaranji

57

Revision of S.E. (Mech) To B.E. structure

One Day

04th August 2007

PVPIT, Budhgaon

58

Best Practices for strategic Growth of Engineering Institutions

One Day

14th March 2006.

Pune

59

Inculcating Entrepreneurship in students

One Day

14th March 2006

Pune

60

Restructuring of syllabus for B.E. (Mech) Course

One Day

24th August 2002.

Govt. COE, Karad

61

Ideas, Recent trends in CAD-CAM Technology

One Day

09th September 1999.

KBP, Satara

62

Workshop on T.E. Mech Syllabus

One Day

5th August 1998

D.Y. Patil COE, Kolhapur

63

Recent Advances in Design

Two Days

10-11 March 2011

JJMCOE, Jaysingpur

64

Heat and Mass Transfer laboratory Methodology

Two Days

June 22 – 24 2010.

RIT, Sakharale

65

National Level Workshop on “Recent Trends in Heat Exchange

Two Days

19th and 20th January 2007

JJMCOE, Jaysingpur

66

IPROM-97

Two Days

15th and 16th March 1997

WCE, Sangli

67

Industry Institute partnership

3 day

03.01.2001 to

05.01.2001

Dr. JJMCOE Jaysingpur

68

Restructuring of syllabus for B.E. (Mechanical) course

1 day

24.08.2002

Government college of Engineering, Karad

69

Energy management and conversion

1 day

12.08.2003

TKIET Warananagar

70

Curriculum development of T.E. Mechanical revised

1 day

20.09.2003

P.V.P.I.T. Bughgaon

71

Teaching methodology and Aids, New Techniques for T.E. Mech part I and II Revised

2 day

27.08.2004 to

28.08.2004

P.V.P.I.T. Bughgaon

72

Application of FEM using ANSYS 13

2 day

03.08.2013 to 04.08.2013

Dr. JJMCOE Jaysingpur

73

Product design and creativity

2 day

16.08.2013 to

17.08.2013

Dr. JJMCOE Jaysingpur

74

Introduction to LaTEX

1 day

10.092014

Dr. JJMCOE Jaysingpur

75

Teaching methodology for S.E. Mech revised curriculum

1 day

12.09.2014

S.I.T. Yadrav

76

Teaching methodology for S.E. Mech 2014 15 revised curriculum

1 day

19.09.2014

S.G.I. Atigre

77

Teaching methodology for S.E. Mech curriculum development and syllabus framing of TE and BE Mechanical design related subjects

1 day

12.02.2015

Dr. JJMCOE Jaysingpur

78

Industrial automation

3 day

03.03.2015 to

05.03.2015

EIE Projects India, Pune

79

Teaching methodology in design related and interdisciplinary subjects  of T.E. Mech part I & II revised syllabus of S.U.

1 day

14.08.2015

Dr. JJMCOE Jaysingpur

80

Applications and hardware interface using MATLAB

1 day

29.08.2015

Dr. JJMCOE Jaysingpur

81

Vibration measurement and analysis

2 day

31.10.2015 to

01.11.2015

P.V.P.I.T. Bughgaon

82

Vibration and noise: methods of analysis, measurement and control

3 day

21.03.2016 to

23.03.2016

Dr. JJMCOE Jaysingpur

1

Teaching methodology in subjects of B.E. Mech part I & II new syllabus

1 day

19.08.2016

Dr. JJMCOE Jaysingpur

2

TBT for e Yantra initiative

5 Months

23.09.2016 to

13.01.2017

I.I.T. Bombay

3

Workshop on “Recent Trends in Manufacturing”

2 Days

3rd Feb.2010

4th Feb.2010.

WCE Sangli.

4

Workshop on “ Improving Teaching Pedagogy”

3 Days

16th, 17th, 18th, Sept. 2010

Dr. J. J. M. COE, Jaysingpur.

5

National Seminar on “ Emerging Trends in Renewable & Non Renewable energy Technology”

1 Day

22nd Oct. 2010

Shivaji University Kolhapur

6

Seminar on “Recent Advances in Design”

2 Days

10th& 11th March 2011

Dr. J. J. M. COE, Jaysingpur.

7

Workshop on “Industrial Consultancy”

1 Day

09th September 2011.

Dr. J. J. M. COE, Jaysingpur.

8

Workshop on “ Engineering Education Towards Global Repute”

1 Day

7th Oct. 2011

Dr. J. J. M. COE, Jaysingpur

9

Training Program on “Application of FEA using ANSYS-13

2 Days

03rd to 4th August 2013

Dr. J. J. M. COE, Jaysingpur

10

International Conference on Industrial Applications of Signal Processing

3 Days

25th to 27th November 2013

DACOE,Karad

11

43rd ISTE National Annual Convention on “Emproving Techincal Education to Address Sustainability and Global Competitiveness

3 Days

19th to 21st Dec.2013

TKIET Warananagar

12

Workshop on “Introduction to Latex”

1 Day

10th Sept. 2014

Dr. J. J. M. COE, Jaysingpur

13

Workshop on “ Teaching Methodology of  Manufacturing Related Subjects At S.E.(Mechanical)

1 Day

27th September 2015

KIT Kolhapur

14

Workshop on “ Teaching Methodology of S.E.(Mechanical),Curriculum Development  and Syllabus Framing of T.E and B.E.(Mechanical) Design related Subjects of Shivaji University Kolhapur

1 Day

12th February 2015

Dr. J. J. M. COE, Jaysingpur

15

Workshop on “Teaching Methodology of T.E. Mechanical Engineering”

1 Day

31st July 2015

DKTE Ichalkarniji

16

Workshop on “ Teaching Methodology in Design related and Interdisciplinary Subjects of T.E.(Mechanical) Part I and II Revised Syllabus of Shivaji University Kolhapur”

1 Day

14th August 2015

Dr. J. J. M. COE, Jaysingpur

17

Workshop on “ Applications and Hardware interface using MATLAB”

1 Day

29th August 2015

Dr. J. J. M. COE, Jaysingpur

18

Workshop on Teaching Methodology in Subjects of B.E.(Mechanical) Part I and II New Syllabus

1 Day

 

19th August 2016

Dr. J. J. M. COE, Jaysingpur

19

Training Program on “ I.C.Engines Dismantling and Assembly Hands on Practice”

1 Day

23rd December 2016

Dr. J. J. M. COE, Jaysingpur

20

Engineering Mechanics

2 weeks

26th Nov. – 6th Dec. 2013

IIT Bombay at JJMCOE

21

Introduction to Research Methodology

2 weeks

25th June to 4th July

IIT, Bombay at WCE, Sangli

22

Recent trends in Mfg. Tech.(RTMT-2012)

2 days

3rd& 4th Feb-2012

WCE, Sangli

23

Faculty induction program

1 week

15-22th July 2015

JJMCOE, Jaysingpur

24

Industrial automation

3 days

03-05 March 2015

JJMCOE, Jaysingpur

25

Introduction to Latex

A day

10/09/2014

Dept. of ETRX JJMCOE

26

Computational Fluid Dynamics

1 week

28/3/13-01/04/13

GCE, Karad

27

CFD using ansys fluent

1 week

 

GCE, Karad

28

Advances in thermal Engineering

2 days

15/03/14-16/03/14

KIT Kolhapur

29

Recent Trends in Heat Exchangers

2 Days

24.10.2016-25.10.2016

WCE,Sangli

30

I.C.Engine Dismantling and Assembly Hands on Practice

1 Day

23.12.2016

JJMCOE, Jaysingpur

31

Advances in Thermodynamics

2 day

15.03.2014 to 16.03.2014

KIT, Kolhapur, Under lead college activity by SU

32

Material Characterization by Thermal Analysis

1 day

05.12.2012

Netzsch Technologies India Pvt. Ltd, Pune

33

Product Design and Creativity

2 day

16.08.2013-17.08.2013

JJMCOE, Jaysingpur

34

Teaching Methodology

1 day

14.08.2015

Dr. JJM , Jaysingpur.

35

CAD/CAM Lab

2 day

1.08.2015 to 02.08.2015

KIT, Kolhapur.

36

Attended workshop on Research Methodology

2 day

2016

WCE Sangli

37

One day workshop on

T. E. (Mech) – I Curriculum

One day

5th August 1998

D. Y. Patil College of Engg. Kolhapur

38

One day workshop on teaching methodology for

T. E. (Mech) – II Curriculum

One day

29th January 1999

Dr. J. J. Magdum College of Engg. Jaysingpur

39

One day workshop on Curriculum Dev. (Restructuring) of B.E. (Prod) Curriculum

One day

30th August 2002

KIT’s college of Engg. Kolhapur

40

One day workshop on Curriculum development Mechanical Engineering

One day

11th January 2003

KBP College of Engineering & Polytechnic Satara

41

One day workshop on Curriculum Development on T.E.(Prod) I & II (Revised)

One day

3rd September 2003

KIT’s college of Engg. Kolhapur

42

One day workshop on Curriculum Development of B.E.(Prod)

One day

16th September 2004

KIT’s college of Engg. Kolhapur

43

One day workshop on Curriculum development of B. E. (Mech) – I & II

One day

2nd November 2004

R. I. T. Sakharale

(Islampur)

44

One day workshop on Curriculum discussion on B.E.(Prod) –I (Revised)

One day

2nd September 2005

KIT’s college of Engg. Kolhapur

45

One day workshop on revision of S.E. to B.E. structure

One day

4th August 2007

PV Patil Institute of Technology Budhgaon, Sangli

46

One day workshop on Curriculum discussion on B.E.(Mech) (Revised)

One day

5th January 2008

KIT’s college of Engg. Kolhapur

47

One day seminar on Aesthetics ,ergonomics and creativity

One day

16th February 2008

Walchand College of Engg. Sangli

48

Three days soft skill training.

Three days

28/01/09 to 30/01/09

Infosys Technologies Pune

49

One day workshop on Curriculum development

One day

08/01/10

Dr. J. J. Magdum College of Engg. Jaysingpur

50

Two  days workshop on Recent Trends in Manufacturing Techniques

Two  days

05/02/10 to

06/02/10

Walchand College of Engg. Sangli

51

One day workshop on teaching methodology for

S. E. (Mech)

One day

12th February 2015

Dr. J. J. Magdum College of Engg. Jaysingpur

52

One day workshop on teaching methodology for

T. E. (Mech)

One day

31 July 2015

DKTE Textile ans Engg Institute

Ichalkaranji

53

One day workshop on teaching methodology of “ Design Related and Interdisciplinary subjects”

One day

14th August 15

Dr. J. J. Magdum College of Engg. Jaysingpur

54

One day workshop on “ teaching methodology of subjectsof B. E. (Mech) – I & II – Revised Structure”

One day

19th August 2016

Dr. J. J. Magdum College of Engg.

Journal Publication

 

Sr. No.

Title of Paper

Authors Name

Name of the Publisher

Academic Year

1

An Overview of Analysis of

Anti-Roll Bar of Passenger Car with Nonlinear Parameter.

Husen J. Nadaf and Prof. A. M. Naniwadekar

International

Journal for Scientific Research & Development

2015

2

Analysis of Anti-Roll Bar of

Passenger Car Using Alternative Material.

Husen J. Nadaf and Prof. A. M. Naniwadekar

International Journal of Advanced

Technology in Engineering and Science

2015

3

Analysis of Anti-Roll Bar of

Passenger Car for its Nonlinear Behavior with Help of CAE.

Husen J. Nadaf and Prof. A. M. Naniwadekar

International Journal

of Science Technology & Engineering

2015

4

Analysis of Half car passive suspension system with non linear suspension parameters

Mr.M.V.Kharade

International Journal of advanced information ans science technology

(ISSN2319-2682)

May2017

5

Experimental & Theoretical Study of vibration response analysis for Lower control arm of suspension system under static and dynamic loading

Mr.M.V.Kharade

Global Journal of Engineering Science and Researches

(ISSN 2348-8034)

April 2016

6

Finite Element analysis and Experimental validation of lower control arm

Mr.M.V.Kharade

INTERNATIONAL JOURNAL OF ENGINEERING DEVELOPMENT AND RESEARCH

(ISSN 2321-9939)

June 2016

7

An overview of design, optimization and vibration analysis of peristaltic pump using Finite Element analysis

Mr.M.V.Kharade

International Education and Research Journal

(ISSN 2395-1621)

June 2016

8

Conditioning Monitoring of gearbox using vibration and acoustic signals

Mr.M.V.Kharade

International Journal of Advanced Technology and Science

(ISSN2348-7550)

Aug. 2015

9

Conditioning Monitoring of Gearbox Using Different Methods: A Review

Mr.M.V.Kharade

International Journal of Modern Engineering Research

(ISSN2348-7550)

December 2014

10

Smart material Magneto rheological fluid

Mr.M.V.Kharade

International

Organization Of Scientific Research

(ISSN2278-1684)

 

February 2013

11

Through put line reduction by lean manufacturing

Mr.M.V.Kharade

International

Organization Of Scientific Research

(ISSN2278-1684)

February 2013

12

“Design And Development Of Tractor Trolley Hook Bending Machine”

Nilesh R Kumbhar

Omakar Pisal

International Journal of Engineering and Computing Science, (ISSN 2250-1371), Vol 7,

March 2017

13

“An Overview Of Disarray In Nonlinear Active Suspension System Under Random Road Excitation With Time Delay”,

Nilesh R Kumbhar, Prof. S. H. Sawant

Dr. J. A. Tamboli

IJMER  (ISSN:2249-6645) Vol.-II Issue-1 pp332-335

Feb 2012

14

An Industrial Energy Audit: Basic Approach”

Nilesh R Kumbhar, Rahul R Joshi

IJMER,(ISSN:2249-6645), Vol.-II, Issue-1 pp313-315

 

15

Castor Oil as Green Lubricant : A Review”,

Nilesh Kumbhar, Mangesh Chinchkar

Prof. S. T. Satpute

IJERT, (ISSN:2278-0181), Vol.-IIssue 5

 

16

Experimental Investigation and CFD analysis of Exhaust Back Pressure (EBP) of C.I. Engine

P.R.Kulkarni

International Journal of Engineering Research in Mechanical and Civil Engineering

Special Issue. Feb. 2017

17

Forced Convection heat transfer Enhancement by using conical ring inserts – A Review

P.R.Kulkarni

International Advanced Journal in Science, engineering and technology,

June 2016,Vol 3, Issue 6,

18

Best Practices to improve Quality in engineering Education in Rural Area

P.R.Kulkarni

Journal of Engineering Education Transformations, Special Issue on ICTIEE 2016

January 2016 Issue No. 115, Vol. 29 no.3

19

Experimental Analysis of Natural Convection Heat Transfer from Horizontal Rectangular Fin Arrays with a semi-circular profiled notch at the center

P.R.Kulkarni

International Research Journal of Engineering And Technology,

May 2016,Vol. 3, Issue 5,

20

Experimental investigation of Effect of Electro Hydrodynamic Effect on Performance of refrigeration System with R – 134A

P.R.Kulkarni

International Journal of Innovative research in Science & Technology

July 2016

21

Experimental Investigation of Heat Transfer Bahaviour in a Circular Tube with Conical Ring Inserts.

P.R.Kulkarni

International Journal of Engineering Science and Computing

July 2016,

Vol 6 Issue 7

22

An Overview of effect of Electro Hydrodynamic effect on Performance of refrigeration System with R – 134 A

P.R.Kulkarni

International Journal of engineering Sciences & research Technology,

October 2015,

23

Review of Natural Convection Heat Transfer from Different Configuration of Horizontal rectangular fin arrays

P.R.Kulkarni

International Journal for Innovative Research in Science & technology, ICITDEME’15 Dec 2015 Conference Proceedings

Special Issue Dec. 2015

24

Enthalpy Wheel Application for Heat Recovery in Heat Exchanger

P.R.Kulkarni

International Journal of Advanced Research in Science and Engineering,

Special Issue (01), May 2015,Vo. No. 4,

25

Performance  comparison of R22 and R290 Refrigerants using smaller diameter condenser tubes

P.R.Kulkarni

International Journal of Informative & Futuristic Research

May 2015 Volume 2, Issue 9

 

26

Experimental Investigation on Forced Convection Heat Transfer Augmentation Using Annular Blockages

P.R.Kulkarni

International Journal of Engineering ad General Science

May-June 2015 Volume 3, Issue 3

27

Review Paper on Forced Convection Heat Transfer Augmentation Using Annular Blockages

P.R.Kulkarni

International Journal of Advanced Research and Studies.

March 2015 Volume IV , Issue II

28

A Review on Performance of Refrigeration System Using Nano fluids

P.R.Kulkarni

International Journal for Scientific Research & Development

May 2015, Volume 3, Issue 02

29

Experimental Evaluation of helical Coil Tube in Tube Heat Exchanger

P.R.Kulkarni

International Journal of engineering Research and Technology

February 2015, Volume 3, Issue 2

30

Application of SiO2 Nanoparticles as Lubricant Additive in VCRS; An Experimental Investigation

P.R.Kulkarni

Asian Review of Mechanical Engineering

Jan-June 2015, Volume 4, No. 1

31

Design Development and Performance Evaluation of Indirect Forced Convection Solar Dryer for Grapes

P.R.Kulkarni

International Journal for Scientific Research & Development

May 2015, Volume 3, Issue 02

32

Experimental Investigation of Heat Transfer Enhancement of Cross Flow  Heat Exchanger with Hybrid Nano fluid as a Coolant

P.R.Kulkarni

International Engineering Research Journal

June 2015, Volume 1, Issue 5

33

Performance Improvement of Solar Flat plate collector Using Formed Tubes –A Review

P.R.Kulkarni

International Journal of Advanced Engineering Technology

April June 2015,Vol VI, Issue II

34

An Analysis on Design and Efficiency of Window Frames

P.R.Kulkarni

Journal of Advances in Sciences and Technology

August 2013 Vol. V, No. X

35

Examination of the Heat Transfer Design of High Performance Window Frames

P.R.Kulkarni

Journal of Advances in Sciences and Technology

August 2012 Vol. III, No. VI

36

A Study Upon Determining The heat Transfer Coefficient of Frame Information Using Inner cavities

P.R.Kulkarni

Journal of Advances in Sciences and Technology

May 2013Vol. V, No. IX

37

Review of Solar Sorption Refrigeration Technologies

P.R.Kulkarni

Journal of Advances in Science and Technology

Feb 2012, Vol III, No. V

38

Design of Development of waste Heat Recovery Systems for Domestic Refrigerator

P.R.Kulkarni

IOSR Journal of Mechanical Engineering

2012

39

Safety aspects of CO2 as Refrigerant

P.R.Kulkarni

IOSR Journal of Mechanical  Engineering

2012

40

Advances on Thermal Driven Cooling and Refrigeration Systems

P.R.Kulkarni

International Journal In Science and Technology

May 2012, Vol III, Issue V

41

Design And Development Of PLC Operated Hydraulic System For Machining Process

P R Patil,

N V Hargude

IJMET

2012-13

42

Smart Material: Magneto Rheological Fluid

P.R. Pati1

IOSR-JMT

2012-13

43

Rejection analysis of nozzle holder manufacturing unit using root cause analysis

P.R. Patil

International Journal of Advanced Information Science and  Technology   

2015-16

44

Enhancement of heat transfer in a horizontal circular pipe by tape inserts

 Vaibhav G.Talandage

International Journal of Advances in Engineering

2014

45

Experimental analysis of boiling and measurement of contact angle of drop on surface with Triton X -100 as surfactant in pure water

 Vaibhav G.Talandage

International research Journal of Engineering and Technology

2015

46

Experimental analysis of boiling and measurement of contact angle of drop on surface with Triton X -100 as surfactant in pure water

 Vaibhav G.Talandage

International research Journal of Engineering and Technology

2015

47

Review of Heat transfer of pulsating flow

 Vaibhav G.Talandage

International Journal of scientific research

2015

48

Experimental study of heat transfer parameters using wire coil inserts of different material

 Vaibhav G.Talandage

International Journal of scientific research

2015

49

Heat Transfer Enhancement by Using Nanomaterial in Phase Change Material for Latent Heat Thermal Energy Storage System

Vaibhav G.Talandage

Asian Journal of Engineering and Applied Technology (AJEAT), Vol. 2 No. 2, pp. 52-57, ISSN 2249-068X.

  2013

50

Experimental Investigation of Heat Transfer Augmentation on Heat pipe with Nano material”

 Vaibhav G.Talandage

International Engineering Research Journal (IERJ) Volume 1 Issue 7 Page 573-579, ISSN 2395-1621.

  2015

 

 

 

Memberships

 

Sr. No.

Grade of Membership

Name of Organization

Academic Year

1

Life time

ISTE

Life time

2

Life Member

ISTE(LM37715)

2003

3

Life Member

TSI(LM#5722)

2015

4

Life Member

ISTE

 

5

Life Member

ISTE

 

6

Member

SAE

 

7

LM 95693

ISTE

2014

8

Life member * LM27863

ISTE

25/05/1997

9

Member * 16275

ISHRAE

15/12/2008

10

Life Member

Indian Society For Technical Education

Since December 1999

11

Life Member

Tribology  Society of India

Since August

 2014

12

Life Member

ISTE

 

13

Member

ISHRAE

 

14

Life time

ISTE

Life time

15

Life Member

ISTE LM-27873

1999

16

Life Member

TSI, India.LM-5720

2015

17

Member of institution of engineers

 

 

18

Life member of ISTE

 

 

 

Student Achievements

Student Achievements – 2016-17
 
Sr. No. Name of Students Class Event Prize/ Participant
01
Snehal Naik (Captain) Satyjeet Pawar (Vice Captain) Total Team Members=20 TE National Level E- Kart Racing Championship (Mohite Racing Track, Kolhapur) Runner up
02
Suyash Kandi (Captain) Gauri Lande (Vice Captain) Total Team Members=10 SE Effi Cycle 2016 (Lovely Professional University, Punjab) Stood 35th All Over India
 
Student Achievement in Year 2015 - 16
 
Sr. No. Name of Students Class Event Prize / Participant Date
01
Vitthal S. Patil BE Poster Presentation at ISHRAE Student Chapter Event, JJMCOE, Jaysingpur First Prise 16-09-2015
Poster Presentation at, JJMCOE, Jaysingpur First Prize 15-09-2015
Rangoli at Civil and NSS, JJMCOE, Jaysingpur First Prize 15-09-2015
Rangoli at IT Department, JJMCOE, Jaysingpur Best Performance 05-09-2015
02.
Tushar L. Mahind BE Rangoli at Civil and NSS, JJMCOE, Jaysingpur First Prize 15-09-2015
03.
Akshay R. Thorve BE Poster Presentation at ISHRAE Student Chapter Event, JJMCOE, Jaysingpur First Prize 15-09-2015
04.
Karan V. Jadhav BE Rangoli at IT Department, JJMCOE, Jaysingpur Best Performance 15-09-2015
05.
Omkar D. Pisal TE Paper Presentation at Civil Dept. and NSS, JJMCOE, Jaysingpur Second Prize 16-09-2015
Automobile Internship at Sinhgad College of Engineering, Pune Best Intern 08-06-1015
06.
Abhinav J. Joshi TE Quiz Competition at Civil Dept. and NSS, JJMCOE, Jaysingpur Second Prize  
07.
Piyush P. Rokade TE Environmental Film Making at Dr. JJMCOE, Jaysingpur Second Prize 16-09-2015
08.
Tejas N. Natu TE Sakal Photography Competition at Sangli District Level First Prize 20-09-2015
09.
Sahil G. Mujawar TE Poster Presentation at ETRX. Dept, JJMCOE, Jaysingpur First Prize  

 

Student’s Achievement
 
Team VENINEERS
(Captain - Swapnil Kulkarni)
Best Acceleration
all over India in
GO-KART Elite Karting – 14
Bhopal 25/02/2015 1st Prize
Mr. Swapnil Kulkarni TE
Mr. Shubham Chavan TE
Mr. Shubham Akolkar TE
Mr. Sachin Khichade TE
Mr. Sujit Kadam TE
Mr. Sumit Chougule TE
Mr. Rohit Tamdalge TE
Mr. Jeevan Gavali TE
Mr. Pratik Kulkarni TE
Mr. Hrishikesh Kolhatkar TE
Mr. Parag Khanzode TE
Mr. Girish Choiethermani TE
Mr. Swapnil Ganbawale TE
Mr. Naim Mulla TE
Team ASHWAMEDH
(Captain - Shreyas Santosh Kumbhar)
Endurance Test of
GO-KART, Elite
Karting – 14
Bhopal 25/02/2015 2nd Prize
Mr. Shreyas Santosh Kumbhar SE
Mr. Rohan Ravindra Sadare BE
Mr. Omkar Sanjay Pujari BE
Mr. Rahul Ajay Patil BE
Mr. Sourabh Bhujbali Savagar BE
Mr. Siddharth Vivek Gadve BE
Mr. Abhishek Rajendra Talange BE
Mr. Tejas Nagesh Natu SE
Mr. Susmit Narayan Kulkarni SE
Miss. Sayali Rajendra Chothe SE